Description
Product information:
- Input voltage range 90-270 v 40-70 hz
- Power Factor at 230 v 0.976
- Efficiency 89.4%
- Full load current (110/230v) 9.8/4.6
- Ripple noise (R.M.S.) 14mv
- Ground leakage 0.5 ma
- Generator/ mains power required to run unit (watts)
- 12 v 20 amp approx 300 watts
- 12 v 30 amp approx 450 watts
- 12 v 40 amp approx 600 watts
- 12 v 50 amp approx 750 watts
- 12 v 60 amp approx 900 watts
- 24 v 20 amp approx 600 watts
- 24 v 30 amp approx 900 watts
- volt metre accuracy +/- 1%
- amp metre accuracy +/- 1%
- Temperature Compensation on the ProCharge Ultra: 0.018V/18mV per 1degC either side of 20degC, When temp rises, voltage drops. When temp drops, voltage rises.
Additional Features:
- Global Input Power- This battery charger will operate anywhere in the world! By design, this battery charger will automatically operate with an a/c input of 90-260 volts (40-80 hz) automatically.
- 11 Pre-programmed battery charge curves, including LiPO4, GEL, AGM, Calcium, and Flooded Lead Acid Batteries.
- One custom, user programmable battery charge profile. Can be set from the charger, no need for a computer.
- Four Step Battery Charging Profile extends the life of your batteries by ensuring a full charge & conditioning, as well as entering a float mode when charging is complete to protect against overcharging your batteries.
- One common negative, three positive battery posts allows the user to charge 1, 2 or 3 battery banks.
- Two Digital Meters displaying real time current and voltage measurements.
- One power meter showing % of charger capacity being used as well as power capacity remaining.
- Active Power Factor Correction (PFC)- up to 0.99pf, ensuring efficient power conversion, increasing efficiency by nearly 40% over older, non-PFC technology.
- Additionally, our new synchronized rectification output increases the efficiency of this charger up to 10% over traditional diode based chargers found on the market today.
- High Voltage de-sulphination cycle for customers with flooded lead acid batteries.
- Low activity, stand-by mode to increase battery life.
- Digital Microprocessor Controlled High Voltage Protection System (Primary) and an emergency backup analog controlled high voltage trip (secondary)
- Constructed of non-ferrous metals and marine grade materials. Lightweight, Compact footprint for easy installation.
- Designed and built to UL1236 Marine & ABYC-31 standards.
- 32 LED Information Panel, internal scan and systems check.
- Remote port for optional remote control w/ 10 meter cable. Remote can be surface, flush, or recess mounted.
- Battery temperature sensor included.
Remote control option
- 110x 68 x20 mm
- Including 10 meters cable
- Unique remote housing can be surface mounted, recess mounted or flush mounted
